Skip to product information
1 of 6
  • Play video

ObsidianWire®

T3 Universal

Custom Universal for Tele®

Available in Canada at:


Super Easy, Solder-less Install
Key Features:

  • Traditional 3-Way Tele® switching
  • Built for Humbucker Loaded Telecasters
  • 4 Optimized Modes (HH, HS, SH & SS)
  • Improves clarity for humbuckers
  • Balances single coils
  • Fits Fender® Telecaster®
  • Fits Squier® Telecaster® with adjustments
  • Includes Pro-Wired Jack

ObsidianWire solderless install logo

Super Easy, Solder-less Install
All Obsidian® Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 

TELECTASTER® ELECTRONICS FOR HUMBUCKER LOADED TELES®

We have created this harness especially for humbucker or P90 loaded Telecasters, and made it compatible with single coils, or single coil sized humbuckers as well. We incorporate INTELLIGENT SWITCHING which allows you to get the absolute most out of both pickups, no matter the configuration

INTELLIGENT SWITCHING

Optimized for humbuckers & single-coils When building a Telecaster with a mix of humbuckers and single coils, there is a toss-up between choosing 500k controls, to retain the life of a humbucker, or 250k controls, to balance brighter single coils.

We say 'why choose? '. So we build in Obsidian® Intelligent Switching to give you the absolute best of both your humbuckers and single coils with a wiring harness that will automatically switch between the two.

THE MODES

  • HH Tele® (Humbucker + Humbucker)
  • HS Telecaster (Humbucker Neck + Single Coil Bridge)
  • SH Telecaster (Humbucker Bridge + Single Coil Neck)
  • SS Tele® (Two Single coils / traditional Tele® mode)

CRYSTAL CLEAR TONE

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

DUAL SC (COIL SPLIT) - UPGRADE OPTION

Turn your humbuckers in to single coils, and back again. To add true versatility to your guitar we build in Obsidian® Dual SC, allowing you to split each of your humbuckers to singlecoils for lower output, more dynamic tones.

Obsidian® Dual SC is built in to your volume controls using push/pull pots, so no extra mods are required to your guitar.
- Requires split coil compatible humbuckers

ObsidianWire HH & HS Universal Telecaster Electronics
ObsidianWire HH & HS Universal  Tele Wiring Harness
ObsidianWire HH & HS Universal  Tele Wiring Harness
Custom Universal for Tele®
ObsidianWire HH & HS Universal  Tele Wiring Harness
ObsidianWire HH & HS Universal  Tele Wiring Harness
Custom Universal for Tele®
Custom Universal for Tele®
ObsidianWire HH & HS Universal  Tele Wiring Harness

Humbucker Optimized Wiring - For HH, HS, SH & SS Telecaster®

The Custom Universal for Tele®

  • Traditional 3-Way Tele® switching
  • Built for Humbucker Loaded Telecasters
  • 4 Optimized Modes (HH, HS, SH & SS)
  • Improves clarity for humbuckers
  • Balances single coils
  • Fits Fender® Telecaster®
  • Fits Squier® Telecaster® with adjustments
  • Includes Pro-Wired Jack

Details

Description

ObsidianWire solderless install logo

Super Easy, Solder-less Install
All Obsidian® Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 

TELECTASTER® ELECTRONICS FOR HUMBUCKER LOADED TELES®

We have created this harness especially for humbucker or P90 loaded Telecasters, and made it compatible with single coils, or single coil sized humbuckers as well. We incorporate INTELLIGENT SWITCHING which allows you to get the absolute most out of both pickups, no matter the configuration

INTELLIGENT SWITCHING

Optimized for humbuckers & single-coils When building a Telecaster with a mix of humbuckers and single coils, there is a toss-up between choosing 500k controls, to retain the life of a humbucker, or 250k controls, to balance brighter single coils.

We say 'why choose? '. So we build in Obsidian® Intelligent Switching to give you the absolute best of both your humbuckers and single coils with a wiring harness that will automatically switch between the two.

THE MODES

  • HH Tele® (Humbucker + Humbucker)
  • HS Telecaster (Humbucker Neck + Single Coil Bridge)
  • SH Telecaster (Humbucker Bridge + Single Coil Neck)
  • SS Tele® (Two Single coils / traditional Tele® mode)

CRYSTAL CLEAR TONE

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

DUAL SC (COIL SPLIT) - UPGRADE OPTION

Turn your humbuckers in to single coils, and back again. To add true versatility to your guitar we build in Obsidian® Dual SC, allowing you to split each of your humbuckers to singlecoils for lower output, more dynamic tones.

Obsidian® Dual SC is built in to your volume controls using push/pull pots, so no extra mods are required to your guitar.
- Requires split coil compatible humbuckers

Specs

COMPONENTS

  • Potentiometers: ObsidianWire® Custom CTS® Pots (+/-10%) Split Shaft 24 Spline with 1/4" Adapters
  • Capacitors: (150 Series Polyester Film 0.022uf) (+/-5%)
  • Switch: Genuine Oak® 3 Way Switch
  • Jack: Pro-Wired Switchcraft® J11 Mono // OR Pure Tone® Mono Multi-Contact 1/4 in

Compatibility

  • Fits: Fender® US & MIM Telecaster® - Direct Fit // Right Hand Guitar Only
  • Fits: Fender® Japan Telecaster® - Replace control plate & knobs
  • Fits: Squier® Telecaster® - Replace control plate & knobs
  • Knobs: Requires US Spec 1/4" Solid Shaft Knobs
  • Control Plate: Use Genuine Fender or Obsidian® plate only - Other aftermarket plates will NOT fit
  • Pickups: Built for any combo of two humbuckers, single coils or P90s.
  • Coil Split Upgrade: Requires Compatible Split Coil (Four Conductor) Pickups
  • Does NOT Fit: Thinline telecaster, or any guitar not specified above

Install

For install help and other resources please go to our Info Hub.

Shipping

US Based Fulfillment:

We ship from Michigan, USA.

Please note that due to the way in-state taxes are collected, we cannot ship website orders within Michigan state. If you are based in Michigan, please order through our Amazon store here as this is set up to collect the required sales taxes. Apologies for any inconvenience caused.

Canada

Shipping method: Business days: Price (US$ Aprox.)
ECONOMY POST 7 - 21 8.99
DHL PACKET 5 - 10 13.99

 

Taxes and duties

Obsidian® DOES NOT pay duties, taxes or customs clearance charges.

Duties and taxes charged by your local customs agency, will be your own responsibility.

If you live outside the USA, we recommend checking with your own country's customs agency what these may be prior to ordering. 

If you are concerned, consider ordering from dealer near you 

International Dealers

  • Solderless Install

    Super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors.

  • Pro-Grade Quality

    The absolute best guitar wiring upgrades, using custom specified parts and perfected techniques to ensure that your harness will be an upgrade for you and your guitar. Every time.

  • Greater Functionality

    Guitar electronics that will deliver a greater range of sounds from your pickups, with more switching options, and more dynamic setups to suit your guitar.

  • Improved Sound

    Guitar wiring that allows the full dynamic range of your pickups, and just as importantly, help find a harness that is matched to you.

Customer Reviews

Based on 21 reviews
76%
(16)
10%
(2)
5%
(1)
0%
(0)
10%
(2)
M
Millard LeMay (Fort Mill, US)
Install Time: 11 - 20 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Mostly great

The kit worked well with single coil pickups, but not with two humbuckers. Yes, I did turn the switch to HH. Overall, I love the kit.

D
Dana (Salt Lake City, US)
Install Time: 1 Hour +
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Quality products, company and owners.

A very quality product, very well packaged. I'm not a handy man or fix-it guy. Having said that, instructions left me a little dazed. Emailed Obsidian and the owner of the company got me sorted out, talk about customer service! Thanks for the help dude.

R
Robert Purdy (Chicago, US)
Install Time: 0 - 10 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
I should have listened...

The controls/selector came beautifully boxed and looks wonderful. However, it doesn't fit in my G&L Tribute ASAT Classic, which the website stated wouldn't fit. I should have listened....however, I just picked up a CNC Router and plan on cutting out and making my own T-style body and I will use the Obsidian Wire control set on it.

D
David Brown (Riverside, US)
Install Time: 20 - 30 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Easy to install, but watch the online videos

I'm really happy with this upgrade. After I watched some videos, I was able to install with minimal difficulty. Great product!

R
Ricardo Fuentes (Dallas, US)
Install Time: 0 - 10 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Easy peasy switching

Obsidian made it easy to pair the neck humbucker with the single coil on my telecaster. And can also pull on the tone knob for single coil neck tones. The assembly is compact and easy to install.